1 | # Global Postfix configuration file. This file lists only a subset |
---|
2 | # of all parameters. For the syntax, and for a complete parameter |
---|
3 | # list, see the postconf(5) manual page (command: "man 5 postconf"). |
---|
4 | # |
---|
5 | # For common configuration examples, see BASIC_CONFIGURATION_README |
---|
6 | # and STANDARD_CONFIGURATION_README. To find these documents, use |
---|
7 | # the command "postconf html_directory readme_directory", or go to |
---|
8 | # http://www.postfix.org/. |
---|
9 | # |
---|
10 | # For best results, change no more than 2-3 parameters at a time, |
---|
11 | # and test if Postfix still works after every change. |
---|
12 | |
---|
13 | # SOFT BOUNCE |
---|
14 | # |
---|
15 | # The soft_bounce parameter provides a limited safety net for |
---|
16 | # testing. When soft_bounce is enabled, mail will remain queued that |
---|
17 | # would otherwise bounce. This parameter disables locally-generated |
---|
18 | # bounces, and prevents the SMTP server from rejecting mail permanently |
---|
19 | # (by changing 5xx replies into 4xx replies). However, soft_bounce |
---|
20 | # is no cure for address rewriting mistakes or mail routing mistakes. |
---|
21 | # |
---|
22 | #soft_bounce = no |
---|
23 | |
---|
24 | # LOCAL PATHNAME INFORMATION |
---|
25 | # |
---|
26 | # The queue_directory specifies the location of the Postfix queue. |
---|
27 | # This is also the root directory of Postfix daemons that run chrooted. |
---|
28 | # See the files in examples/chroot-setup for setting up Postfix chroot |
---|
29 | # environments on different UNIX systems. |
---|
30 | # |
---|
31 | queue_directory = /var/spool/postfix |
---|
32 | |
---|
33 | # The command_directory parameter specifies the location of all |
---|
34 | # postXXX commands. |
---|
35 | # |
---|
36 | command_directory = /usr/sbin |
---|
37 | |
---|
38 | # The daemon_directory parameter specifies the location of all Postfix |
---|
39 | # daemon programs (i.e. programs listed in the master.cf file). This |
---|
40 | # directory must be owned by root. |
---|
41 | # |
---|
42 | daemon_directory = /usr/libexec/postfix |
---|
43 | |
---|
44 | # QUEUE AND PROCESS OWNERSHIP |
---|
45 | # |
---|
46 | # The mail_owner parameter specifies the owner of the Postfix queue |
---|
47 | # and of most Postfix daemon processes. Specify the name of a user |
---|
48 | # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS |
---|
49 | # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In |
---|
50 | # particular, don't specify nobody or daemon. PLEASE USE A DEDICATED |
---|
51 | # USER. |
---|
52 | # |
---|
53 | mail_owner = postfix |
---|
54 | |
---|
55 | # The default_privs parameter specifies the default rights used by |
---|
56 | # the local delivery agent for delivery to external file or command. |
---|
57 | # These rights are used in the absence of a recipient user context. |
---|
58 | # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. |
---|
59 | # |
---|
60 | #default_privs = nobody |
---|
61 | |
---|
62 | # INTERNET HOST AND DOMAIN NAMES |
---|
63 | # |
---|
64 | # The myhostname parameter specifies the internet hostname of this |
---|
65 | # mail system. The default is to use the fully-qualified domain name |
---|
66 | # from gethostname(). $myhostname is used as a default value for many |
---|
67 | # other configuration parameters. |
---|
68 | # |
---|
69 | #myhostname = host.domain.tld |
---|
70 | #myhostname = virtual.domain.tld |
---|
71 | |
---|
72 | # The mydomain parameter specifies the local internet domain name. |
---|
73 | # The default is to use $myhostname minus the first component. |
---|
74 | # $mydomain is used as a default value for many other configuration |
---|
75 | # parameters. |
---|
76 | # |
---|
77 | #mydomain = domain.tld |
---|
78 | |
---|
79 | # SENDING MAIL |
---|
80 | # |
---|
81 | # The myorigin parameter specifies the domain that locally-posted |
---|
82 | # mail appears to come from. The default is to append $myhostname, |
---|
83 | # which is fine for small sites. If you run a domain with multiple |
---|
84 | # machines, you should (1) change this to $mydomain and (2) set up |
---|
85 | # a domain-wide alias database that aliases each user to |
---|
86 | # user@that.users.mailhost. |
---|
87 | # |
---|
88 | # For the sake of consistency between sender and recipient addresses, |
---|
89 | # myorigin also specifies the default domain name that is appended |
---|
90 | # to recipient addresses that have no @domain part. |
---|
91 | # |
---|
92 | #myorigin = $myhostname |
---|
93 | #myorigin = $mydomain |
---|
94 | |
---|
95 | # RECEIVING MAIL |
---|
96 | |
---|
97 | # The inet_interfaces parameter specifies the network interface |
---|
98 | # addresses that this mail system receives mail on. By default, |
---|
99 | # the software claims all active interfaces on the machine. The |
---|
100 | # parameter also controls delivery of mail to user@[ip.address]. |
---|
101 | # |
---|
102 | # See also the proxy_interfaces parameter, for network addresses that |
---|
103 | # are forwarded to us via a proxy or network address translator. |
---|
104 | # |
---|
105 | # Note: you need to stop/start Postfix when this parameter changes. |
---|
106 | # |
---|
107 | inet_interfaces = all |
---|
108 | |
---|
109 | # The proxy_interfaces parameter specifies the network interface |
---|
110 | # addresses that this mail system receives mail on by way of a |
---|
111 | # proxy or network address translation unit. This setting extends |
---|
112 | # the address list specified with the inet_interfaces parameter. |
---|
113 | # |
---|
114 | # You must specify your proxy/NAT addresses when your system is a |
---|
115 | # backup MX host for other domains, otherwise mail delivery loops |
---|
116 | # will happen when the primary MX host is down. |
---|
117 | # |
---|
118 | #proxy_interfaces = |
---|
119 | #proxy_interfaces = 1.2.3.4 |
---|
120 | |
---|
121 | # The mydestination parameter specifies the list of domains that this |
---|
122 | # machine considers itself the final destination for. |
---|
123 | # |
---|
124 | # These domains are routed to the delivery agent specified with the |
---|
125 | # local_transport parameter setting. By default, that is the UNIX |
---|
126 | # compatible delivery agent that lookups all recipients in /etc/passwd |
---|
127 | # and /etc/aliases or their equivalent. |
---|
128 | # |
---|
129 | # The default is $myhostname + localhost.$mydomain. On a mail domain |
---|
130 | # gateway, you should also include $mydomain. |
---|
131 | # |
---|
132 | # Do not specify the names of virtual domains - those domains are |
---|
133 | # specified elsewhere (see VIRTUAL_README). |
---|
134 | # |
---|
135 | # Do not specify the names of domains that this machine is backup MX |
---|
136 | # host for. Specify those names via the relay_domains settings for |
---|
137 | # the SMTP server, or use permit_mx_backup if you are lazy (see |
---|
138 | # STANDARD_CONFIGURATION_README). |
---|
139 | # |
---|
140 | # The local machine is always the final destination for mail addressed |
---|
141 | # to user@[the.net.work.address] of an interface that the mail system |
---|
142 | # receives mail on (see the inet_interfaces parameter). |
---|
143 | # |
---|
144 | # Specify a list of host or domain names, /file/name or type:table |
---|
145 | # patterns, separated by commas and/or whitespace. A /file/name |
---|
146 | # pattern is replaced by its contents; a type:table is matched when |
---|
147 | # a name matches a lookup key (the right-hand side is ignored). |
---|
148 | # Continue long lines by starting the next line with whitespace. |
---|
149 | # |
---|
150 | # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". |
---|
151 | # |
---|
152 | mydestination = $myhostname, localhost.$mydomain, localhost |
---|
153 | #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain |
---|
154 | #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, |
---|
155 | # mail.$mydomain, www.$mydomain, ftp.$mydomain |
---|
156 | |
---|
157 | # REJECTING MAIL FOR UNKNOWN LOCAL USERS |
---|
158 | # |
---|
159 | # The local_recipient_maps parameter specifies optional lookup tables |
---|
160 | # with all names or addresses of users that are local with respect |
---|
161 | # to $mydestination, $inet_interfaces or $proxy_interfaces. |
---|
162 | # |
---|
163 | # If this parameter is defined, then the SMTP server will reject |
---|
164 | # mail for unknown local users. This parameter is defined by default. |
---|
165 | # |
---|
166 | # To turn off local recipient checking in the SMTP server, specify |
---|
167 | # local_recipient_maps = (i.e. empty). |
---|
168 | # |
---|
169 | # The default setting assumes that you use the default Postfix local |
---|
170 | # delivery agent for local delivery. You need to update the |
---|
171 | # local_recipient_maps setting if: |
---|
172 | # |
---|
173 | # - You define $mydestination domain recipients in files other than |
---|
174 | # /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. |
---|
175 | # For example, you define $mydestination domain recipients in |
---|
176 | # the $virtual_mailbox_maps files. |
---|
177 | # |
---|
178 | # - You redefine the local delivery agent in master.cf. |
---|
179 | # |
---|
180 | # - You redefine the "local_transport" setting in main.cf. |
---|
181 | # |
---|
182 | # - You use the "luser_relay", "mailbox_transport", or "fallback_transport" |
---|
183 | # feature of the Postfix local delivery agent (see local(8)). |
---|
184 | # |
---|
185 | # Details are described in the LOCAL_RECIPIENT_README file. |
---|
186 | # |
---|
187 | # Beware: if the Postfix SMTP server runs chrooted, you probably have |
---|
188 | # to access the passwd file via the proxymap service, in order to |
---|
189 | # overcome chroot restrictions. The alternative, having a copy of |
---|
190 | # the system passwd file in the chroot jail is just not practical. |
---|
191 | # |
---|
192 | # The right-hand side of the lookup tables is conveniently ignored. |
---|
193 | # In the left-hand side, specify a bare username, an @domain.tld |
---|
194 | # wild-card, or specify a user@domain.tld address. |
---|
195 | # |
---|
196 | #local_recipient_maps = unix:passwd.byname $alias_maps |
---|
197 | #local_recipient_maps = proxy:unix:passwd.byname $alias_maps |
---|
198 | #local_recipient_maps = |
---|
199 | |
---|
200 | # The unknown_local_recipient_reject_code specifies the SMTP server |
---|
201 | # response code when a recipient domain matches $mydestination or |
---|
202 | # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty |
---|
203 | # and the recipient address or address local-part is not found. |
---|
204 | # |
---|
205 | # The default setting is 550 (reject mail) but it is safer to start |
---|
206 | # with 450 (try again later) until you are certain that your |
---|
207 | # local_recipient_maps settings are OK. |
---|
208 | # |
---|
209 | unknown_local_recipient_reject_code = 550 |
---|
210 | |
---|
211 | # TRUST AND RELAY CONTROL |
---|
212 | |
---|
213 | # The mynetworks parameter specifies the list of "trusted" SMTP |
---|
214 | # clients that have more privileges than "strangers". |
---|
215 | # |
---|
216 | # In particular, "trusted" SMTP clients are allowed to relay mail |
---|
217 | # through Postfix. See the smtpd_recipient_restrictions parameter |
---|
218 | # in postconf(5). |
---|
219 | # |
---|
220 | # You can specify the list of "trusted" network addresses by hand |
---|
221 | # or you can let Postfix do it for you (which is the default). |
---|
222 | # |
---|
223 | # By default (mynetworks_style = subnet), Postfix "trusts" SMTP |
---|
224 | # clients in the same IP subnetworks as the local machine. |
---|
225 | # On Linux, this does works correctly only with interfaces specified |
---|
226 | # with the "ifconfig" command. |
---|
227 | # |
---|
228 | # Specify "mynetworks_style = class" when Postfix should "trust" SMTP |
---|
229 | # clients in the same IP class A/B/C networks as the local machine. |
---|
230 | # Don't do this with a dialup site - it would cause Postfix to "trust" |
---|
231 | # your entire provider's network. Instead, specify an explicit |
---|
232 | # mynetworks list by hand, as described below. |
---|
233 | # |
---|
234 | # Specify "mynetworks_style = host" when Postfix should "trust" |
---|
235 | # only the local machine. |
---|
236 | # |
---|
237 | #mynetworks_style = class |
---|
238 | #mynetworks_style = subnet |
---|
239 | #mynetworks_style = host |
---|
240 | |
---|
241 | # Alternatively, you can specify the mynetworks list by hand, in |
---|
242 | # which case Postfix ignores the mynetworks_style setting. |
---|
243 | # |
---|
244 | # Specify an explicit list of network/netmask patterns, where the |
---|
245 | # mask specifies the number of bits in the network part of a host |
---|
246 | # address. |
---|
247 | # |
---|
248 | # You can also specify the absolute pathname of a pattern file instead |
---|
249 | # of listing the patterns here. Specify type:table for table-based lookups |
---|
250 | # (the value on the table right-hand side is not used). |
---|
251 | # |
---|
252 | #mynetworks = 168.100.189.0/28, 127.0.0.0/8 |
---|
253 | #mynetworks = $config_directory/mynetworks |
---|
254 | #mynetworks = hash:/etc/postfix/network_table |
---|
255 | |
---|
256 | # The relay_domains parameter restricts what destinations this system will |
---|
257 | # relay mail to. See the smtpd_recipient_restrictions description in |
---|
258 | # postconf(5) for detailed information. |
---|
259 | # |
---|
260 | # By default, Postfix relays mail |
---|
261 | # - from "trusted" clients (IP address matches $mynetworks) to any destination, |
---|
262 | # - from "untrusted" clients to destinations that match $relay_domains or |
---|
263 | # subdomains thereof, except addresses with sender-specified routing. |
---|
264 | # The default relay_domains value is $mydestination. |
---|
265 | # |
---|
266 | # In addition to the above, the Postfix SMTP server by default accepts mail |
---|
267 | # that Postfix is final destination for: |
---|
268 | # - destinations that match $inet_interfaces or $proxy_interfaces, |
---|
269 | # - destinations that match $mydestination |
---|
270 | # - destinations that match $virtual_alias_domains, |
---|
271 | # - destinations that match $virtual_mailbox_domains. |
---|
272 | # These destinations do not need to be listed in $relay_domains. |
---|
273 | # |
---|
274 | # Specify a list of hosts or domains, /file/name patterns or type:name |
---|
275 | # lookup tables, separated by commas and/or whitespace. Continue |
---|
276 | # long lines by starting the next line with whitespace. A file name |
---|
277 | # is replaced by its contents; a type:name table is matched when a |
---|
278 | # (parent) domain appears as lookup key. |
---|
279 | # |
---|
280 | # NOTE: Postfix will not automatically forward mail for domains that |
---|
281 | # list this system as their primary or backup MX host. See the |
---|
282 | # permit_mx_backup restriction description in postconf(5). |
---|
283 | # |
---|
284 | #relay_domains = $mydestination |
---|
285 | |
---|
286 | # INTERNET OR INTRANET |
---|
287 | |
---|
288 | # The relayhost parameter specifies the default host to send mail to |
---|
289 | # when no entry is matched in the optional transport(5) table. When |
---|
290 | # no relayhost is given, mail is routed directly to the destination. |
---|
291 | # |
---|
292 | # On an intranet, specify the organizational domain name. If your |
---|
293 | # internal DNS uses no MX records, specify the name of the intranet |
---|
294 | # gateway host instead. |
---|
295 | # |
---|
296 | # In the case of SMTP, specify a domain, host, host:port, [host]:port, |
---|
297 | # [address] or [address]:port; the form [host] turns off MX lookups. |
---|
298 | # |
---|
299 | # If you're connected via UUCP, see also the default_transport parameter. |
---|
300 | # |
---|
301 | #relayhost = $mydomain |
---|
302 | #relayhost = [gateway.my.domain] |
---|
303 | #relayhost = [mailserver.isp.tld] |
---|
304 | #relayhost = uucphost |
---|
305 | #relayhost = [an.ip.add.ress] |
---|
306 | |
---|
307 | # REJECTING UNKNOWN RELAY USERS |
---|
308 | # |
---|
309 | # The relay_recipient_maps parameter specifies optional lookup tables |
---|
310 | # with all addresses in the domains that match $relay_domains. |
---|
311 | # |
---|
312 | # If this parameter is defined, then the SMTP server will reject |
---|
313 | # mail for unknown relay users. This feature is off by default. |
---|
314 | # |
---|
315 | # The right-hand side of the lookup tables is conveniently ignored. |
---|
316 | # In the left-hand side, specify an @domain.tld wild-card, or specify |
---|
317 | # a user@domain.tld address. |
---|
318 | # |
---|
319 | #relay_recipient_maps = hash:/etc/postfix/relay_recipients |
---|
320 | |
---|
321 | # INPUT RATE CONTROL |
---|
322 | # |
---|
323 | # The in_flow_delay configuration parameter implements mail input |
---|
324 | # flow control. This feature is turned on by default, although it |
---|
325 | # still needs further development (it's disabled on SCO UNIX due |
---|
326 | # to an SCO bug). |
---|
327 | # |
---|
328 | # A Postfix process will pause for $in_flow_delay seconds before |
---|
329 | # accepting a new message, when the message arrival rate exceeds the |
---|
330 | # message delivery rate. With the default 100 SMTP server process |
---|
331 | # limit, this limits the mail inflow to 100 messages a second more |
---|
332 | # than the number of messages delivered per second. |
---|
333 | # |
---|
334 | # Specify 0 to disable the feature. Valid delays are 0..10. |
---|
335 | # |
---|
336 | #in_flow_delay = 1s |
---|
337 | |
---|
338 | # ADDRESS REWRITING |
---|
339 | # |
---|
340 | # The ADDRESS_REWRITING_README document gives information about |
---|
341 | # address masquerading or other forms of address rewriting including |
---|
342 | # username->Firstname.Lastname mapping. |
---|
343 | |
---|
344 | # ADDRESS REDIRECTION (VIRTUAL DOMAIN) |
---|
345 | # |
---|
346 | # The VIRTUAL_README document gives information about the many forms |
---|
347 | # of domain hosting that Postfix supports. |
---|
348 | |
---|
349 | # "USER HAS MOVED" BOUNCE MESSAGES |
---|
350 | # |
---|
351 | # See the discussion in the ADDRESS_REWRITING_README document. |
---|
352 | |
---|
353 | # TRANSPORT MAP |
---|
354 | # |
---|
355 | # See the discussion in the ADDRESS_REWRITING_README document. |
---|
356 | |
---|
357 | # ALIAS DATABASE |
---|
358 | # |
---|
359 | # The alias_maps parameter specifies the list of alias databases used |
---|
360 | # by the local delivery agent. The default list is system dependent. |
---|
361 | # |
---|
362 | # On systems with NIS, the default is to search the local alias |
---|
363 | # database, then the NIS alias database. See aliases(5) for syntax |
---|
364 | # details. |
---|
365 | # |
---|
366 | # If you change the alias database, run "postalias /etc/aliases" (or |
---|
367 | # wherever your system stores the mail alias file), or simply run |
---|
368 | # "newaliases" to build the necessary DBM or DB file. |
---|
369 | # |
---|
370 | # It will take a minute or so before changes become visible. Use |
---|
371 | # "postfix reload" to eliminate the delay. |
---|
372 | # |
---|
373 | #alias_maps = dbm:/etc/aliases |
---|
374 | #alias_maps = hash:/etc/aliases |
---|
375 | #alias_maps = hash:/etc/aliases, nis:mail.aliases |
---|
376 | #alias_maps = netinfo:/aliases |
---|
377 | |
---|
378 | # The alias_database parameter specifies the alias database(s) that |
---|
379 | # are built with "newaliases" or "sendmail -bi". This is a separate |
---|
380 | # configuration parameter, because alias_maps (see above) may specify |
---|
381 | # tables that are not necessarily all under control by Postfix. |
---|
382 | # |
---|
383 | #alias_database = dbm:/etc/aliases |
---|
384 | #alias_database = dbm:/etc/mail/aliases |
---|
385 | alias_database = hash:/etc/aliases |
---|
386 | #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases |
---|
387 | |
---|
388 | # ADDRESS EXTENSIONS (e.g., user+foo) |
---|
389 | # |
---|
390 | # The recipient_delimiter parameter specifies the separator between |
---|
391 | # user names and address extensions (user+foo). See canonical(5), |
---|
392 | # local(8), relocated(5) and virtual(5) for the effects this has on |
---|
393 | # aliases, canonical, virtual, relocated and .forward file lookups. |
---|
394 | # Basically, the software tries user+foo and .forward+foo before |
---|
395 | # trying user and .forward. |
---|
396 | # |
---|
397 | #recipient_delimiter = + |
---|
398 | |
---|
399 | # DELIVERY TO MAILBOX |
---|
400 | # |
---|
401 | # The home_mailbox parameter specifies the optional pathname of a |
---|
402 | # mailbox file relative to a user's home directory. The default |
---|
403 | # mailbox file is /var/spool/mail/user or /var/mail/user. Specify |
---|
404 | # "Maildir/" for qmail-style delivery (the / is required). |
---|
405 | # |
---|
406 | #home_mailbox = Mailbox |
---|
407 | #home_mailbox = Maildir/ |
---|
408 | |
---|
409 | # The mail_spool_directory parameter specifies the directory where |
---|
410 | # UNIX-style mailboxes are kept. The default setting depends on the |
---|
411 | # system type. |
---|
412 | # |
---|
413 | #mail_spool_directory = /var/mail |
---|
414 | #mail_spool_directory = /var/spool/mail |
---|
415 | |
---|
416 | # The mailbox_command parameter specifies the optional external |
---|
417 | # command to use instead of mailbox delivery. The command is run as |
---|
418 | # the recipient with proper HOME, SHELL and LOGNAME environment settings. |
---|
419 | # Exception: delivery for root is done as $default_user. |
---|
420 | # |
---|
421 | # Other environment variables of interest: USER (recipient username), |
---|
422 | # EXTENSION (address extension), DOMAIN (domain part of address), |
---|
423 | # and LOCAL (the address localpart). |
---|
424 | # |
---|
425 | # Unlike other Postfix configuration parameters, the mailbox_command |
---|
426 | # parameter is not subjected to $parameter substitutions. This is to |
---|
427 | # make it easier to specify shell syntax (see example below). |
---|
428 | # |
---|
429 | # Avoid shell meta characters because they will force Postfix to run |
---|
430 | # an expensive shell process. Procmail alone is expensive enough. |
---|
431 | # |
---|
432 | # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN |
---|
433 | # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. |
---|
434 | # |
---|
435 | #mailbox_command = /some/where/procmail |
---|
436 | #mailbox_command = /some/where/procmail -a "$EXTENSION" |
---|
437 | |
---|
438 | # The mailbox_transport specifies the optional transport in master.cf |
---|
439 | # to use after processing aliases and .forward files. This parameter |
---|
440 | # has precedence over the mailbox_command, fallback_transport and |
---|
441 | # luser_relay parameters. |
---|
442 | # |
---|
443 | # Specify a string of the form transport:nexthop, where transport is |
---|
444 | # the name of a mail delivery transport defined in master.cf. The |
---|
445 | # :nexthop part is optional. For more details see the sample transport |
---|
446 | # configuration file. |
---|
447 | # |
---|
448 | # NOTE: if you use this feature for accounts not in the UNIX password |
---|
449 | # file, then you must update the "local_recipient_maps" setting in |
---|
450 | # the main.cf file, otherwise the SMTP server will reject mail for |
---|
451 | # non-UNIX accounts with "User unknown in local recipient table". |
---|
452 | # |
---|
453 | #mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp |
---|
454 | |
---|
455 | # If using the cyrus-imapd IMAP server deliver local mail to the IMAP |
---|
456 | # server using LMTP (Local Mail Transport Protocol), this is prefered |
---|
457 | # over the older cyrus deliver program by setting the |
---|
458 | # mailbox_transport as below: |
---|
459 | # |
---|
460 | # mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp |
---|
461 | # |
---|
462 | # The efficiency of LMTP delivery for cyrus-imapd can be enhanced via |
---|
463 | # these settings. |
---|
464 | # |
---|
465 | # local_destination_recipient_limit = 300 |
---|
466 | # local_destination_concurrency_limit = 5 |
---|
467 | # |
---|
468 | # Of course you should adjust these settings as appropriate for the |
---|
469 | # capacity of the hardware you are using. The recipient limit setting |
---|
470 | # can be used to take advantage of the single instance message store |
---|
471 | # capability of Cyrus. The concurrency limit can be used to control |
---|
472 | # how many simultaneous LMTP sessions will be permitted to the Cyrus |
---|
473 | # message store. |
---|
474 | # |
---|
475 | # To use the old cyrus deliver program you have to set: |
---|
476 | #mailbox_transport = cyrus |
---|
477 | |
---|
478 | # The fallback_transport specifies the optional transport in master.cf |
---|
479 | # to use for recipients that are not found in the UNIX passwd database. |
---|
480 | # This parameter has precedence over the luser_relay parameter. |
---|
481 | # |
---|
482 | # Specify a string of the form transport:nexthop, where transport is |
---|
483 | # the name of a mail delivery transport defined in master.cf. The |
---|
484 | # :nexthop part is optional. For more details see the sample transport |
---|
485 | # configuration file. |
---|
486 | # |
---|
487 | # NOTE: if you use this feature for accounts not in the UNIX password |
---|
488 | # file, then you must update the "local_recipient_maps" setting in |
---|
489 | # the main.cf file, otherwise the SMTP server will reject mail for |
---|
490 | # non-UNIX accounts with "User unknown in local recipient table". |
---|
491 | # |
---|
492 | #fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp |
---|
493 | #fallback_transport = |
---|
494 | |
---|
495 | # The luser_relay parameter specifies an optional destination address |
---|
496 | # for unknown recipients. By default, mail for unknown@$mydestination, |
---|
497 | # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned |
---|
498 | # as undeliverable. |
---|
499 | # |
---|
500 | # The following expansions are done on luser_relay: $user (recipient |
---|
501 | # username), $shell (recipient shell), $home (recipient home directory), |
---|
502 | # $recipient (full recipient address), $extension (recipient address |
---|
503 | # extension), $domain (recipient domain), $local (entire recipient |
---|
504 | # localpart), $recipient_delimiter. Specify ${name?value} or |
---|
505 | # ${name:value} to expand value only when $name does (does not) exist. |
---|
506 | # |
---|
507 | # luser_relay works only for the default Postfix local delivery agent. |
---|
508 | # |
---|
509 | # NOTE: if you use this feature for accounts not in the UNIX password |
---|
510 | # file, then you must specify "local_recipient_maps =" (i.e. empty) in |
---|
511 | # the main.cf file, otherwise the SMTP server will reject mail for |
---|
512 | # non-UNIX accounts with "User unknown in local recipient table". |
---|
513 | # |
---|
514 | #luser_relay = $user@other.host |
---|
515 | #luser_relay = $local@other.host |
---|
516 | #luser_relay = admin+$local |
---|
517 | |
---|
518 | # JUNK MAIL CONTROLS |
---|
519 | # |
---|
520 | # The controls listed here are only a very small subset. The file |
---|
521 | # SMTPD_ACCESS_README provides an overview. |
---|
522 | |
---|
523 | # The header_checks parameter specifies an optional table with patterns |
---|
524 | # that each logical message header is matched against, including |
---|
525 | # headers that span multiple physical lines. |
---|
526 | # |
---|
527 | # By default, these patterns also apply to MIME headers and to the |
---|
528 | # headers of attached messages. With older Postfix versions, MIME and |
---|
529 | # attached message headers were treated as body text. |
---|
530 | # |
---|
531 | # For details, see "man header_checks". |
---|
532 | # |
---|
533 | #header_checks = regexp:/etc/postfix/header_checks |
---|
534 | |
---|
535 | # FAST ETRN SERVICE |
---|
536 | # |
---|
537 | # Postfix maintains per-destination logfiles with information about |
---|
538 | # deferred mail, so that mail can be flushed quickly with the SMTP |
---|
539 | # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". |
---|
540 | # See the ETRN_README document for a detailed description. |
---|
541 | # |
---|
542 | # The fast_flush_domains parameter controls what destinations are |
---|
543 | # eligible for this service. By default, they are all domains that |
---|
544 | # this server is willing to relay mail to. |
---|
545 | # |
---|
546 | #fast_flush_domains = $relay_domains |
---|
547 | |
---|
548 | # SHOW SOFTWARE VERSION OR NOT |
---|
549 | # |
---|
550 | # The smtpd_banner parameter specifies the text that follows the 220 |
---|
551 | # code in the SMTP server's greeting banner. Some people like to see |
---|
552 | # the mail version advertised. By default, Postfix shows no version. |
---|
553 | # |
---|
554 | # You MUST specify $myhostname at the start of the text. That is an |
---|
555 | # RFC requirement. Postfix itself does not care. |
---|
556 | # |
---|
557 | #smtpd_banner = $myhostname ESMTP $mail_name |
---|
558 | #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) |
---|
559 | |
---|
560 | # PARALLEL DELIVERY TO THE SAME DESTINATION |
---|
561 | # |
---|
562 | # How many parallel deliveries to the same user or domain? With local |
---|
563 | # delivery, it does not make sense to do massively parallel delivery |
---|
564 | # to the same user, because mailbox updates must happen sequentially, |
---|
565 | # and expensive pipelines in .forward files can cause disasters when |
---|
566 | # too many are run at the same time. With SMTP deliveries, 10 |
---|
567 | # simultaneous connections to the same domain could be sufficient to |
---|
568 | # raise eyebrows. |
---|
569 | # |
---|
570 | # Each message delivery transport has its XXX_destination_concurrency_limit |
---|
571 | # parameter. The default is $default_destination_concurrency_limit for |
---|
572 | # most delivery transports. For the local delivery agent the default is 2. |
---|
573 | |
---|
574 | #local_destination_concurrency_limit = 2 |
---|
575 | #default_destination_concurrency_limit = 20 |
---|
576 | |
---|
577 | # DEBUGGING CONTROL |
---|
578 | # |
---|
579 | # The debug_peer_level parameter specifies the increment in verbose |
---|
580 | # logging level when an SMTP client or server host name or address |
---|
581 | # matches a pattern in the debug_peer_list parameter. |
---|
582 | # |
---|
583 | debug_peer_level = 2 |
---|
584 | |
---|
585 | # The debug_peer_list parameter specifies an optional list of domain |
---|
586 | # or network patterns, /file/name patterns or type:name tables. When |
---|
587 | # an SMTP client or server host name or address matches a pattern, |
---|
588 | # increase the verbose logging level by the amount specified in the |
---|
589 | # debug_peer_level parameter. |
---|
590 | # |
---|
591 | #debug_peer_list = 127.0.0.1 |
---|
592 | #debug_peer_list = some.domain |
---|
593 | |
---|
594 | # The debugger_command specifies the external command that is executed |
---|
595 | # when a Postfix daemon program is run with the -D option. |
---|
596 | # |
---|
597 | # Use "command .. & sleep 5" so that the debugger can attach before |
---|
598 | # the process marches on. If you use an X-based debugger, be sure to |
---|
599 | # set up your XAUTHORITY environment variable before starting Postfix. |
---|
600 | # |
---|
601 | debugger_command = |
---|
602 | PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin |
---|
603 | xxgdb $daemon_directory/$process_name $process_id & sleep 5 |
---|
604 | |
---|
605 | # If you can't use X, use this to capture the call stack when a |
---|
606 | # daemon crashes. The result is in a file in the configuration |
---|
607 | # directory, and is named after the process name and the process ID. |
---|
608 | # |
---|
609 | # debugger_command = |
---|
610 | # PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; |
---|
611 | # echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 |
---|
612 | # >$config_directory/$process_name.$process_id.log & sleep 5 |
---|
613 | # |
---|
614 | # Another possibility is to run gdb under a detached screen session. |
---|
615 | # To attach to the screen sesssion, su root and run "screen -r |
---|
616 | # <id_string>" where <id_string> uniquely matches one of the detached |
---|
617 | # sessions (from "screen -list"). |
---|
618 | # |
---|
619 | # debugger_command = |
---|
620 | # PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen |
---|
621 | # -dmS $process_name gdb $daemon_directory/$process_name |
---|
622 | # $process_id & sleep 1 |
---|
623 | |
---|
624 | # INSTALL-TIME CONFIGURATION INFORMATION |
---|
625 | # |
---|
626 | # The following parameters are used when installing a new Postfix version. |
---|
627 | # |
---|
628 | # sendmail_path: The full pathname of the Postfix sendmail command. |
---|
629 | # This is the Sendmail-compatible mail posting interface. |
---|
630 | # |
---|
631 | sendmail_path = /usr/sbin/sendmail.postfix |
---|
632 | |
---|
633 | # newaliases_path: The full pathname of the Postfix newaliases command. |
---|
634 | # This is the Sendmail-compatible command to build alias databases. |
---|
635 | # |
---|
636 | newaliases_path = /usr/bin/newaliases.postfix |
---|
637 | |
---|
638 | # mailq_path: The full pathname of the Postfix mailq command. This |
---|
639 | # is the Sendmail-compatible mail queue listing command. |
---|
640 | # |
---|
641 | mailq_path = /usr/bin/mailq.postfix |
---|
642 | |
---|
643 | # setgid_group: The group for mail submission and queue management |
---|
644 | # commands. This must be a group name with a numerical group ID that |
---|
645 | # is not shared with other accounts, not even with the Postfix account. |
---|
646 | # |
---|
647 | setgid_group = postdrop |
---|
648 | |
---|
649 | # html_directory: The location of the Postfix HTML documentation. |
---|
650 | # |
---|
651 | html_directory = no |
---|
652 | |
---|
653 | # manpage_directory: The location of the Postfix on-line manual pages. |
---|
654 | # |
---|
655 | manpage_directory = /usr/share/man |
---|
656 | |
---|
657 | # sample_directory: The location of the Postfix sample configuration files. |
---|
658 | # This parameter is obsolete as of Postfix 2.1. |
---|
659 | # |
---|
660 | sample_directory = /usr/share/doc/postfix-2.3.3/samples |
---|
661 | |
---|
662 | # readme_directory: The location of the Postfix README files. |
---|
663 | # |
---|
664 | readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES |
---|
665 | |
---|
666 | # Configuracoes para o Expresso |
---|
667 | myorigin = DOMAIN |
---|
668 | myhostname = DOMAIN |
---|
669 | biff = no |
---|
670 | |
---|
671 | append_at_myorigin = no |
---|
672 | append_dot_mydomain = no |
---|
673 | |
---|
674 | unknown_local_recipient_reject_code = 450 |
---|
675 | recipient_delimiter = + |
---|
676 | smtpd_banner = SMTP |
---|
677 | mynetworks = 127.0.0.1/32 |
---|
678 | |
---|
679 | # A lista de dominios que esta maquina considera seu destino final. |
---|
680 | mydestination = $myhostname, localhost.$mydomain, DOMAIN |
---|
681 | |
---|
682 | inet_interfaces = all |
---|
683 | disable_dns_lookups = no |
---|
684 | mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp |
---|
685 | |
---|
686 | #smtpd_use_tls = no |
---|
687 | alias_maps = |
---|
688 | |
---|
689 | virtual_alias_maps = ldap:aliases, ldap:mailboxes, ldap:grupos, ldap:listas |
---|
690 | |
---|
691 | #Caixas Postais |
---|
692 | mailboxes_server_host = 127.0.0.1 |
---|
693 | # host do servidor LDAP. |
---|
694 | mailboxes_version = 3 |
---|
695 | # versao do ldap |
---|
696 | mailboxes_timeout = 10 |
---|
697 | # tempo em segundo para gerar um timeout na consulta |
---|
698 | mailboxes_chase_referral = 0 |
---|
699 | # seguir referral? (false = 0 = nao) |
---|
700 | mailboxes_search_base = LDAP_DN |
---|
701 | #Base do servidor LDAP. |
---|
702 | mailboxes_query_filter = (&(|(mail=%s)(mailAlternateAddress=%s))(objectClass=posixAccount)(phpgwAccountType=u)(accountStatus=active)) |
---|
703 | # A pesquisa que sera feita. Será retornado o UID e o MailForwardingAddress (result_attribute) da Entrada |
---|
704 | # correspondente ao query_filter. %s eh oq vem do postfix. |
---|
705 | mailboxes_bind = no |
---|
706 | mailboxes_domain = hash:/etc/postfix/expresso-dominios |
---|
707 | # utilizar anonymous. |
---|
708 | mailboxes_result_attribute = uid, mailForwardingAddress |
---|
709 | # o LDAP retornará estes atributos. |
---|
710 | |
---|
711 | #Aliases |
---|
712 | aliases_server_host = 127.0.0.1 |
---|
713 | aliases_version = 3 |
---|
714 | aliases_timeout = 10 |
---|
715 | aliases_chase_referral = 0 |
---|
716 | aliases_search_base = LDAP_DN |
---|
717 | aliases_query_filter = (&(|(mail=%s)(mailAlternateAddress=%s))(objectClass=posixAccount)(phpgwAccountType=u)(deliveryMode=forwardOnly)(accountStatus=active)) |
---|
718 | aliases_domain = hash:/etc/postfix/expresso-dominios |
---|
719 | aliases_result_attribute = mailForwardingAddress |
---|
720 | |
---|
721 | #Listas |
---|
722 | listas_server_host = 127.0.0.1 |
---|
723 | listas_version = 3 |
---|
724 | listas_timeout = 10 |
---|
725 | listas_chase_referral = 0 |
---|
726 | listas_search_base = LDAP_DN |
---|
727 | listas_query_filter = (&(mail=%s)(phpgwAccountType=l)(objectClass=posixAccount)(deliveryMode=forwardOnly)(accountStatus=active)) |
---|
728 | listas_domain = hash:/etc/postfix/expresso-dominios |
---|
729 | listas_result_attribute = mailForwardingAddress |
---|
730 | |
---|
731 | #Grupos |
---|
732 | grupos_server_host = 127.0.0.1 |
---|
733 | grupos_version = 3 |
---|
734 | grupos_timeout = 10 |
---|
735 | grupos_chase_referral = 0 |
---|
736 | grupos_search_base = LDAP_DN |
---|
737 | grupos_query_filter = (&(cn=%u)(objectClass=posixGroup)(phpgwAccountType=g)) |
---|
738 | grupos_bind = no |
---|
739 | grupos_domain = hash:/etc/postfix/expresso-dominios |
---|
740 | grupos_result_attribute = memberUid |
---|
741 | |
---|
742 | ##################################################################### |
---|
743 | # CONTROLE DE FALHA DE ENTREGA. |
---|
744 | |
---|
745 | # O tempo entre as tentativas de entrega da fila. |
---|
746 | # The time between deferred queue scans by the queue manager. |
---|
747 | queue_run_delay = 480s |
---|
748 | |
---|
749 | # The maximal time a bounce message is queued before it is considered undeliverable. |
---|
750 | bounce_queue_lifetime = 5400s |
---|
751 | #2400 |
---|
752 | |
---|
753 | # O tempo maximo que uma mensagem fica na fila de adiadas, antes de voltar ao sender. |
---|
754 | # How long a message stays in the queue before it is sent back as undeliverable. |
---|
755 | maximal_queue_lifetime = 5400s |
---|
756 | #2400 |
---|
757 | |
---|
758 | # O tempo maxima entre tentativas de entregar uma mensagem adiada (deferida) |
---|
759 | # The maximal time between attempts to deliver a deferred message. |
---|
760 | maximal_backoff_time = 480s |
---|
761 | |
---|
762 | # O tempo minimo entre tentativas de entregar uma mensagem adiada (deferida) |
---|
763 | # The minimal time between attempts to deliver a deferred message. |
---|
764 | minimal_backoff_time = 240s |
---|